Purification of arsenic-contaminated water using iron molybdate filters and monitoring of their genotoxic, mutagenic, and cytotoxic effects through bioassays.

Environmental contamination has been a cause of concern worldwide, being aggravated by anthropogenic activities carried out without the correct disposal of toxic products in the various habitats on our planet. In Brazil, mining companies are responsible for the contamination of large river basins with toxic elements from mining activities. Among these elements, arsenic draws attention because it is highly carcinogenic and found in waters in concentrations above those recommended by regulatory agencies. Here, Fe2(MoO4)3 nanoparticles are synthesized and used as a filter medium in water purification systems contaminated with arsenic. The adsorption kinetics of arsenic by Fe2(MoO4)3 nanoparticles is fast, showing pseudo-second-order rate constants of 0.0044, 0.0080, and 0.0106 g mg-1 min-1 for As3+, As5+, and MMA, respectively. The adsorption isotherms are better adjusted with the Langmuir and Redlich-Peterson models, indicating that the arsenic adsorption occurs in monolayers on the Fe2(MoO4)3 surface. The Fe2(MoO4)3 adsorption capacities determined for the As3+, As5+, and MMA species are 16.1, 23.1, and 23.5 mg g-1, respectively. The Fe2(MoO4)3 filter is efficient in purifying arsenic-contaminated water, reducing its initial concentration from 1000 µg L-1 to levels close to zero. Biological tests indicate that Fe2(MoO4)3 nanoparticles and filtered water have no cytotoxic, genotoxic, and mutagenic risks to human life. Those results suggest that the Fe2(MoO4)3 filter can be used as an efficient and safe technology for the purification of water contaminated by arsenic.

Simple synthesis and characterization of l-Cystine functionalized δ-FeOOH for highly efficient Hg(II) removal from contamined water and mining waste.

l-Cystine functionalized δ-FeOOH nanoparticles (Cys-δ-FeOOH) were prepared by a cheap and straightforward method for using as an adsorbent of Hg(II) in aqueous solution. X-ray diffraction (XRD), attenuated total reflectance infrared spectroscopy (ATR-IR), and Raman spectroscopy confirmed that Cys-δ-FeOOH was successfully synthesized. Cys-δ-FeOOH with 14 nm crystal size, 34 m2 g-1 surface area, and 9 nm pore size were produced. The functionalization of the δ-FeOOH surface with cysteine decreases the point of zero charge of the iron oxyhydroxide from 8.4 in δ-FeOOH to 5.7 in Cys-δ-FeOOH, which is beneficial for the adsorption of Hg(II) near neutral pH. The maximum Hg(II) adsorption capacity of the δ-FeOOH and Cys-δ-FeOOH at pH 7 were found to be 35 mg g-1 and 217 mg g-1, respectively. The kinetics data were best fitted by a pseudo-second-order model, suggesting chemical adsorption on the surface and pores of Cys-δ-FeOOH nanoparticles. Finally, δ-FeOOH and Cys-δ-FeOOH filters were constructed for purifying mercury-contaminated water. The filters were highly efficient to treat mercury-contaminated water from a Brazilian river, reducing the concentration of mercury in water to values below the allowed limits by the current legislation.

Seasonal variations, metal distribution and water quality in the Todos os Santos River, Southeastern Brazil: a multivariate analysis.

In aquatic habitats, metal contamination from natural and anthropogenic sources continues to pose a concern for human and environmental health. Thus, it is important to complete monitoring studies to assess patterns and the extent of metal contamination in these ecosystems. The purpose of this work was to determine the concentrations of 31 chemical elements and water quality parameters of the Todos os Santos River located in the Mucuri Valley, Minas Gerais, Brazil. A multivariate statistical analysis was used to determine any seasonal and spatial patterns from the data. Results demonstrated that metals including Al, Fe, and Ni exceeded Brazilian and international guidelines nutrients as P also exceed water quality standards. Principal components analysis indicated distinct geographical and seasonal patterns for multiple elements with hierarchical cluster analysis confirming the observed spatial patterns of contamination in the Todos os Santos River.

Purification of arsenic-contaminated water with K-jarosite filters.

The high toxicity and potential arsenic accumulation in several environments have encouraged the development of technologies for its removal from contaminated waters. However, the arsenic released into aquatic environment comes mainly from extremely acidic mining effluents, making harder to find stable adsorbents to be used in these conditions. In this work, K-jarosite particles were synthesized as a stable adsorbent in acidic medium for eliminating arsenic from contaminated water. The adsorption capacities of K-jarosite for As3+, As5+, and monomethylarsonic acid were 9.45, 12.36, and 8.21 mg g-1, respectively. Most arsenic in water was adsorbed within the first 10 min, suggesting the fast arsenic adsorption kinetics of K-jarosite particles. Because of that, a K-jarosite filter was constructed for purifying water at a constant flow. The K-jarosite filter was highly efficient to treat arsenic-contaminated water from a Brazilian river, reducing the concentration of arsenic in water to near zero. These data suggest the K-jarosite filter can be used as a low-cost technology for purifying arsenic-contaminated water in acidic medium.

Adsorption of arsenic from water and its recovery as a highly active photocatalyst.

The contamination of water with arsenic has aroused concern around the world due to its toxic effects. Thus, the development of low-cost technologies for treating water contaminated with toxic metals is highly advisable. Adsorption is an attractive technology for purification of contaminated water, but it only transfers the contaminant from water to the solid adsorbent, which provokes another problem related to solid residue disposal. In this work, we developed a sustainable method for purifying water contaminated with arsenic by using δ-FeOOH nanoparticles. The adsorption capacities of nanomaterial for As3+ and As5+ species were 40 and 41 mg g-1, respectively, and were highly efficient to purify arsenic-contaminated water from a Brazilian river. The concentration of arsenic in water was close to zero after the water treatment by δ-FeOOH. Once the arsenic is adsorbed, it can be recovered by treatment with NaOH solutions. Approximately 85 % of the total adsorbed arsenic could be recovered and used as a precursor to produce useful material (Ag3AsO4) with excellent photocatalytic activity. It was active under visible light and had a high recyclability for oxidation of rhodamine B. Finally, the simple method described is promising to design sustainable process of environmental remediation with minimum residue generation.